40LB Camel Brown DOMINATOR Polymeric Sand with Ceramic Flex Technology for Paver Joints (1/8" to 4") - Professional Grade Stabilizer for Patios, Walkways & Driveways - Weather-Resistant & Durable for Outdoor Landscaping Projects

Premium Dust-Free, American-Made Joint Stabilizing Polymeric Sand for Pavers Thank you for considering DOMINATOR! For the best results, please consider: DOMINATOR is ideal for concrete, wetcast, stone, and clay pavers and can be applied to new or existing installations. Please hold off on using our polymeric sand if temperatures are expected to drop below 50°F within 48 hours of application.The color will darken slightly after activation. To ensure the color meets your expectations, consider using a 10 pound bag to test the product on a 9 sq. ft. area.Do not apply if pavers or stone are wet or damp to avoid premature activation. For New Installations Ensure proper drainage beneath the surface. Installation is not recommended in areas below grade.Edging is necessary to keep the sand in place.DOMINATOR can be used with pavers of any size, but the joint width should be between 1/8" and 4", and the joint depth should hold at least 1" of product. For Existing Installations Before installing DOMINATOR, remove any existing joint material carefully to avoid disturbing the underlayment or paver base.Once all material has been cleared (or a minimum depth of 1" is available), proceed with the installation.Note: DOMINATOR is not intended to be used as a capping sand. How To Apply DOMINATOR Polymeric Sand Previous page Sweep in the Sand Using a push broom, sweep the product to fill the joints completely, down to their full depth. Avoid sweeping the product over a long distance, so that its integrity is preserved. Sweep Off Excess Sand Sweep off excess product with a hard-bristled broom. Use a leaf blower to remove all remaining DOMINATOR Polymeric Sand residue from the surface. Activate Set the spray nozzle to "shower". Work in sections of no more than 9 sq. ft. ensuring wetness throughout the joint. Wait a few seconds and repeat spray pattern. Blow off Remaining Water Use a leaf blower to remove any excess water remaining on the surface. This is to ensure all DOMINATOR Polymeric Sand residue is removed from the surface. Important Please refer to this activation chart to avoid underwatering/overwatering the product. If you notice foam, don’t worry. Stop watering the sand to prevent the polymers from washing away. Elevate Your Outdoor Spaces with Designer Colors Elevate your outdoor space. Transform ordinary pavers with our designer sands. Your vision, our colors. Next page Remember, DOMINATOR Polymeric Sand is haze- and dust-free and requires no additional compaction, making your project easier and quicker to complete. My sand doesn’t harden after 24 hours. I can still press it or scratch it with my finger. Why is this happening? Humidity and temperature can increase the cure time. Polymeric sand will set once that water has fully evaporated from the sand. Note that polymeric sand will appear flexible when wet and may feel spongey but will remain set in your paver joints. After I watered in the sand my pavers now have a haze to them. What did I do wrong? The surface must be completely dry at the beginning of the application process. Any moisture will cause the polymers to stick and prematurely activate leaving a white residue on the surface. Wait 14 days after application to clean your pavers. I am replacing my existing joint stabilizer that is 2" deep. Do I have to remove all the old sand and start fresh? We would recommend removing all the old sand and starting fresh. The old sand underneath could result in poor drainage, causing sand failure due to improper drainage conditions. You need to remove at least 1" for the new sand to perform as intended. I filled the joints until sand reached the top of my pavers. Now rain keeps washing out my sand. Why is this happening? DOMINATOR should fill the joints up to 1/8" BELOW the surface of your paver to avoid washout. When sweeping the sand into the paver joints, you should be able to freely sweep across the surface of your pavers without disturbing the sand. I chose a color but when I received it, it wasn’t the same color as the images. Why is this? Screen colors may vary. Choose a small size to confirm the color is desired for the entire project. Activate it to see the final color as the sand will darken slightly after activation with water. Don't Forget the Finishing Touch DOMINATOR Sealer Protect your new investment or revitalize existing surfaces! This easy-to-apply, professional-grade, fast-drying formula enhances and protects the color of your surfaces.